The Hospira Plum 360 is a patient-ready infusion pump available for rent and sale from US Med-Equip.
The ICU Medical Hospira Plum 360 infusion pump was designed with safety and efficiency in mind. The Plum 360 features a unique closed air management system that allows for automated back-priming to easily remove air from the line without disconnecting from the patient. This large volume IV pump allows a secondary line that connects directly to the cassette. The Plum pump will alert you if the secondary line is not infusing. It has a lot of features that are designed to help you enhance patient safety and increase clinical efficiency.
The Plum 360 can act as a standalone infuser or in conjunction with ICU Medical MedNet software to provide medication safety software at the point of care, with customized drug libraries to support hospital defined protocols by clinical care areas. The Plump pump can communicate with systems on the network via Ethernet or wireless communication using an 802.11 a/b/g/n dual-band radio. The Plum 360 infuser is fully compatible with Plum Series administration sets and accessories, and the CLAVE needleless connection systems, providing a convenient and cost-effective infusion system.
The Plum 360 infusion system is primarily used in parenteral, enteral, and epidural therapies and the administration of whole blood and blood products. It's used in clinical environments at the direction of licensed physicians or certified healthcare professionals.
- Bolus delivery capability to facilitate rapid infusion.
- Intregrated free-flow protection in the PlumSet cassette technology.
- Automated concurrent and piggyback delivery.
- Capability of full IV-EHR interoperability.
- Connects secondary line directly to the PlumSet cassette.
Pump Type: General Infusion
Dimensions: Approx. 8” H x 8” W x 6” D (0.20 m H x 0.20 m W x 0.15 m), excluding pole clamp extrusion and power cord storage
Weight: Approx. 10 lbs. (4.5 kg) with batteryBattery
Life: Approx. 3 hours at up to 125 mL/hr on a single line, or delivers at least 250 mL if > 126 mL/hr
Power Requirements: 120 V~, 50 to 60 Hz, 50 VA
Recharge Time: Approx. 8 hours with the device operating at 125 mL/hr on one line
Volume Range: 0.1 to 99.9 mL (in 0.1 mL increments), 100 to 9999 mL (in 1 mL increments)
Delivery Rate Accuracy: ± 5% (1 to 999 mL/hr), ± 10% (0.1 to 0.9 mL/hr)
Delivery Rates: Lines A and B: 0.1 to 99.9 mL/hr (in 0.1 mL increments), 100 to 999 mL/hr (in 1 mL increments)
Concurrent Delivery: 0.5 mL/hr minimum for each line
PlumSet: 500 mL/hr cumulative (A+B) maximum
KVO: 1.0 mL/hr or the last delivery rate on the associated line, whichever is less
Delivery Units: mL/hr, mcg/kg/min, mcg/min, mcg/kg/hr, mg/min, mg/m2, mg/m2/min, mg/m2/hr, mg/kg, mg/kg/hr, mg/hr, ng/kg/min, g/hr, mEq/hr, mUn/min, units/min, units/hr, units/kg/hr
System Alarms: Occlusion, Air-in-Line, Low Battery, Door Opened While Pumping, Lockout Violation, VTBI Complete, Valve/Cassette Test Failure, Nurse Call, No Action, Programming Not Complete
Occlusion Alarm Pressure: Distal Pressure Limit (without alarm): 1-15 psig (default 6 psig)
For more information, please refer to the following:
- 10.00 LBS
- For Rent or Purchase
All refurbished equipment sold by U.S. Med-Equip, Inc. (“USME”) is patient-ready and is warranted to be free from defects in both materials and workmanship for a period of one (1) year unless otherwise specified. Parts, accessories and internal batteries are covered by a 90-day limited warranty unless otherwise specified. Any stated warranties are in effect from the date of sale. US MED-EQUIP reserves the right to repair, replace or refund (less cost of shipping) any item(s) requiring warranty service. The customer is responsible for return shipping costs and required to contact US MED-EQUIP prior to shipping the item(s) back.